Gasoline is a chemical mixture. It contains more than 150 different compounds, including benzene, toluene, and sometimes lead. Breathing these in is no joke. It can cause dizziness, headache and severe breathing problems. Inhale too much vapor and you risk death. In addition to immediate health hazards, evaporative emissions are also a significant cause of smog and air pollution.
Automakers cannot afford to ignore this. In the early 1970s, the United States introduced strict environmental regulations. All new cars include with an evaporative emission control (EVAP) system. The goal was simple: to capture fuel vapors before they enter the atmosphere.
EVAP systems are closed. It is based on a sealed fuel tank cap, hoses, valves and a small canister filled with activated carbon. As the gas in the tank heats up and evaporates, the pressure increases. Excess steam is not removed and is sent to the carbon tank. Carbon is stuck.
Nothing happens until the engine is running. The valve opens and creates a vacuum. This suction pulls the stored vapors out of the canister into the engine’s air intake. Fresh air is drawn in through the vents to help mix with the smog, ensuring they burn cleanly alongside the normal air-fuel mixture.
Older systems managed this process mechanically. Modern cars use an engine control unit (ECU). The computer monitors the conditions and determines exactly when to purge the canister. It usually happens when the car is running instead of idling. You will never see it work. you will never know it. It just happens behind the scenes.
But the system fails. If the tank is not purged correctly or at the wrong time, the vehicle’s performance and emissions suffer. In some cases, the entire EVAP assembly may need to be replaced. This is an important part of keeping your car legal and air breathable.
Read more about how evaporation works and practical steps you can take to reduce it in your next look.